Level sensor for high temperature | PFG09ZATF

Rotary blade level switch used for monitoring a level threshold, generally full or empty, in a silo or bin. Thanks to its high gas protection rating it is suitable for installation in places where explosive atmospheres may be present during normal operations. It features a sturdy die-cast aluminum casing and an excellent quality price ratio.

Advantages

Version for high temperatures up to 200°C and for contact with corrosive
Has a double flange to drain off condensate.
Easy to install: specific tools, settings or maintenance are not required.
Versatile: can be installed in the vertical, horizontal or oblique positions.
Probe can be adapted to the material monitored thanks to the wide range of paddles available.
Provides a high standard of safety in the presence of explosive dusts/powders or gases.
Extremely reliable, the instrument can be used in addition to radar, capacitive, ultrasound or continuous level probes as a safe signal.

Product line: Rotary paddle level switches

Materials: Level sensors for solids - Level sensors for corrosives - High temperature level switches

Configure and request an offer Request information

PFG09ZATF rotary blade level indicator for solids - high temperatures version

Certifications

ATEX

II 1/2 D Ex ta/tb IIIC T85°C IP65 Da/Db

II 1/2 G Ex d IIB T6 Ga/Gb

UKCA

UK Conformity.

Technical characteristics

Casing and cover in die-cast aluminium
Shaft in AISI 303 / EN 1.4305 stainless steel on life-lubricated sealed bearings, with dust-tight retaining ring in NFKM
All parts in contact with the product are in AISI 303 / EN 1.4305 or AISI 304 / EN 1.4301 stainless steel
Double flange for condensate drain
Broad range of paddles in AISI 304 / EN 1.4301 stainless steel
Flanged process connection with 4 ø7 equidistasnt holes on ø120 mm pitch circle diameter
Rotation speed 1 turn/minute
Ambient temperature -20° ÷ +70°C (-4° ... +158°F)
Process temperature -20° ÷ +200°C (-4° ... +392°F)
Max process temperature 0,8 ÷ 1,1 bar (11,6 ÷ 15,9 psi)
IP65 protection rating (dust-tight, protection against water jets)
Power consumption max 4 W
Contact capacity 5A at 250V (AC)
Micro switch SPDT output signal

CONFIGURATOR

Electrical Specifications

The electrical part of the entire range of PFG09 level probes can be supplied with different voltage ratings and numerous optionals:

Available voltage ratings: 115/230V or 24/48V – 50 … 60Hz (AC) and 24V (DC).
Standard version with faston connectors.
Paddle terminals or self-locking spring terminals are available on request.
4 RPM: increased rotation speed to reduce trip time.
Low temperatures: enable the instrument to function down to -40°C.

Choice of paddle

An essential component that ensures the level indicator functions correctly, the paddle is the basis from which customizing starts since it can be adapted to every type of use.
To make the best choice, it is important to bear in mind the following 5 key points:

Each material has a minimum density that must be detected by the instrument.
The minimum diameter of the entry hole through which the paddle can pass if it cannot be installed inside.
The diameter occupied by the paddle as it turns.
The number of blades changes depending on the intensity of the disturbances to which the paddle is exposed.
Polyamide or stainless steel, depending on the type of material with which the paddle comes into contact.

Documentation

Technical datasheet

3D model

3D Paddles models (STEP)

Manual (ENG)

EU Declaration of Conformity

UK Declaration of Conformity

Brochure

Paddles list

Related products

PFG09Z

Rotative level sensor made of aluminum and stainless steel. It can be applied with G 1" ½ process connection or with flange. Particularly suitable for the detection of food products and corrosive materials. The selection of paddles allows the level switch to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

PFG09

Level sensor with rotary paddle, explosion-proof, suitable in environments with gaseous, explosive or flammable mixtures. It is made of aluminum, and it can be applied with G 1” ½ process connection or flange. A wide choice of paddles allows the level switch to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

PFG05ATFV

Rotary paddle level indicator made of robust die-cast aluminum and stainless steel for all parts in contact with the product, with fixing flange. Variant for condensate drain and temperatures up to 600°C. The choice of propellers allows the detection of materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

PFG05AT

Level sensor with rotary paddle made of aluminum and stainless steel. It can be applied with G 2" 1/2 (BSPP) process connection or with mounting flange. Designed for high temperature and explosion risk environments, also ideal for corrosive substances. The range of paddles allows the level sensor to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.

PFG57AT

Small-sized rotative level sensor, made of aluminum and stainless steel. It can be applied with G 1" 1/2 (BSPP) process connection or with flange. Designed for high temperature and explosion risk environments, also ideal for corrosive substances. The selection of paddles allows the level switch to detect materials with densities between 0.1 and 2.0 kg/dm3. The instrument can be customized.